Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experienceâ€”and the pride and workmanship associated with the moniker Made in USA. We use only the most durable materials to insure long life and dependability. Fill-Rite and Sotera branded products deliver superior performance time and time again, regardless of the application or installation. The SP100 Series Air-Operated Double Diaphragm Pump can be configured in materials that are resistant to industrial chemicals and proven to provide complete compatibility coverage for a wide range of fluids.100 psig (6.9 bar) maximum outlet pressure. 1.12 cfm air consumption. Excellent choice for applications involving petroleum/oil-based fluids such as fuel oils, hydraulic oils, kerosene, turpentines, and motor oils.
10' X 10' Firestone RubberguardTM 60 Mil Epdm Roofing Rubber
SUPERIOR ROOFTOP PERFORMANCE AND LONGEVITY Based on a high-performance synthetic rubber compound, RubberGard EPDM membrane exhibits outstanding Resistance to UV radiation, ozone and weathering on rooftop installations. RubberGard EPDM provides excellent low temperature properties and longer service life. ENVIRONMENTALLY AWARE Membrane is recyclable in many situations, the system's thermal performance may reduce energy consumption. RUBBERGARD EPDM SYSTEM OPTIONS Available attachments include: Fully Adhered, Ballasted and Mechanically Attached. CAN BE APPLIED ANYTIME YEAR-ROUND TRUST FIRESTONE Contractors, building owners, architects and specifiers have trusted Firestone building Products for superior commercial roofing systems for nearly 30 years. With billions of square feet installed globally, and with a commitment to "green" initiatives, Firestone has become the preferred supplier of roofing systems throughout the world.
Poron Polyurethane Open-Cell Foam Sheet, Medium Firmness, No Backing, Black, 0.250" Thickness, 36" Width, 54" Length
Manufacturer: Small Parts
Brand: Small Parts
The Poron polyurethane black open-cell foam sheet has a medium firmness and meets Underwriters Laboratories ULHBF and Federal Motor Vehicle Safety Standard FMVSS 302 specifications. Poron foam is a polyurethane material that provides excellent recovery from compression and offers good chemical resistance. It has a medium firmness, which requires approximately 8 to 14 psi of pressure to compress.Industrial foam is made of plastic or rubber and has internal air cells that make it lightweight and ideal for sealing and cushioning.
Manufacturer: Small Parts
Brand: Small Parts
The Poron polyurethane black open-cell foam sheet has a soft firmness and meets Underwriters Laboratories ULHBF and Federal Motor Vehicle Safety Standard FMVSS 302 specifications. Poron foam is a polyurethane material that provides excellent recovery from compression and offers good chemical resistance. It has a soft firmness, which requires approximately 4 to 8 psi of pressure to compress.Industrial foam is made of plastic or rubber and has internal air cells that make it lightweight and ideal for sealing and cushioning.
This laminate or layered soft/soft material was made specifically for nighttime bruxers. The layering gives the thermoplastic a more abrasion-resistant characteristic that will withstand grinding better than traditional soft sheet materials. Available in packages of 12 laminates.
Nitrile - Commercial Grade White - 60A - Off-White Buna Sheets - 1/16" Thick x 36" Width x 48" Length
White Nitrile, an oil resistant sheet is manufactured for non-marking applications that require a white rubber product. It is a superior, long life sheet designed specifically for general gasketing, countertops and skirting in all areas which oil or grease by-products are present. Nitrile rubber sheet also known as Buna or BunaN is also available in a black pigment. White Nitrile sheet also has a strong aesthetic appeal due to its off-white appearance.
Manufacturer: THE FELT STORE
Brand: The Felt Store
This is a closed cell sponge neoprene. It is primarily used as a cushion and sealing tape against air and moisture. It can also be used as a dust seal for furniture, store fixtures and partitions, noise insulation, padding, expansion joints of precast concrete and steel, vapour barrier for prefab buildings, HVAC and refrigeration, automotive. It is also an excellent door seals for truck and bus bodies, offload equipment and transformer cabinets. More selections available, search for them on Amazon!
Transparent silicone rubber sheet is designed to withstand extreme temperatures. Silicone Translucent is a clear silicone rubber sheet is a unique due to its physical characteristics and appearances. It is resistant to both high and low temperatures of -103F to 450F. Choose this product for its aesthetic appeal, and use it for its sophisticated nature!
EPDM - Commercial Grade - 60A - Rubber Sheet - 1/8" Thick x 36" Width x 36" Length - Black
This blended rubber sheet, Ethylene Propylene Diene Monomer, provides very good resistance to weathering, ozone and UV exposure. It is highly recommended for applications where the elastomer will have excessive exposure to the environment. EPDM makes a great hanger flap, roof pad, or outdoor industrial rubber curtain. It provides very good chemical resistance and dynamic properties. E.P.D.M. blended material is considered a non-oil resistant material. Available in 6 thicknesses (1/16", 1/8", 3/16", 1/4", 3/8", 1/2")
The PCE-DD-A durometer is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a high quality. The PCE-DD-A durometer is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. If the material thickness is not enough, it should be tightened on the back with the same material in order to increase its thickness. You can also find a classification of different degrees of hardness and the classification within the same degree at the following link: Shore Hardness. Technical Spezification Measurement area: 0 ... 100 Shore A Resolution: 0,5 Accuracy: Â±1 Depth of indentation: 0 ... 2.5 mm Pressure force: 1 kg Indenter: 35Â° Dimensions: 80 x 60 x 25 mm Power supply: 1 x 1,5 V (SR44) Weight: approx. 300 g Delivery contents: 1 x PCE-DD A durometer, 1 x case, 1 x battery, 1 x user's manual